inventiv INV B4046 T2B Notice Originale D'utilisation page 87

5. Replace the cutting device with a new one of the same type.
6. Reattach the cutting device (20) onto the spindle, pay attention to correct
alignment.
Tighten the bolt (19) clockwise with 20 Nm max. to ensure safe operation of your
product.
7. Replace this cutting device after 50 hours mowing or 2 years whichever is sooner
regardless of condition. If the cutting device is cracked or damaged, immediately
replace it with a new one.
8. Lubricate the cutting device (20) after each use to prolong the life span of cutting
device and product. Apply light machine oil along the edge of the cutting device.
Grass catcher
1. Inspect the grass catcher before each use. Do not use it if you find any damage.
2. Clean the grass catcher after operation using water and mild soap.
3. Let the grass catcher dry thoroughly before storing to avoid mildew.
Battery Maintenance:
•
Use the following procedures to enable optimum usage of the battery:
▪ Protect the battery against moisture and water.
▪ Store the battery only within a temperature range from 5ºC to 45ºC. As
an example, do not leave the battery in a vehicle or in the mower in direct
sunlight.
▪ Clean the ventilation slots of the battery occasionally with a soft, clean and
dry brush.
•
A considerably shortened operating time after charging is an indication that the
battery is exhausted and must be replaced.
▪ If you do not use the product for a long time, please charge and discharge
the battery park once every 6 months.
19 20
87