inventiv INV B4046 T2B Notice Originale D'utilisation page 80

WARNING!
of the handle is limited by the toothed area. To not attempt
changing the height outside this range!
Inserting the battery
1. Hold open the cover of the battery cavity.
2. Insert the battery pack into the cavity. An audible "click" indicates that the battery
pack has locked into position. Please verify this by briefly trying to put the battery
out again.
3. Insert the safety key. Again, an audible "click" indicates that the component has
locked into position.
4. Close the cover.
Removing the battery
1. Hold open the cover of the battery cavity.
2. Take of the safety key firstly
3. Press the unlocking button and the battery pack will slide up a little
4. Pull out the battery pack
To ensure safe operation the height adjustment
80