Publicité
Les langues disponibles
Les langues disponibles
Druckluftset_5_tlg_SPK7:_
4. Instructions for the 5-piece
accessory set
For information on the correct use of the accessories,
please refer to the following overview.
Compressed air hose
For connecting to a compressed air source.
Blow-out pistol (Figure 1)
Working pressure in bar: 3-8
Range of applications:
For cleaning and blowing out hollow spaces or
hard-to-reach areas, as well as for cleaning
soiled equipment.
The infinitely variable trigger lever allows an
exact dosing of compressed air.
Tire pressure gauge (Figure 2)
Working pressure in bar: 0-8
Range of applications:
The tire pressure gauge allows you to inflate tires
easily and exactly. Use the pressure gauge to
check the tire pressure. If the tire pressure is too
high, you can reduce the pressure with the
integrated relief valve ().
Paint spray gun with cup (Figure 3)
Working pressure in bar: 3-4
Range of applications:
The pain spray gun is ideal for all small scale
priming and painting work.
The adjustment of the air and paint volumes
helps to achieve outstanding results.
The paint spray gun, with an infinite adjustment
from wide to round jet, is ideal for both large
areas and for corners and edges.
Spray gun with suction-feed can
(Figure 4)
Working pressure in bar: 3-8
Range of applications:
Suitable for spraying cold cleaner, spray oil, etc.
The infinitely variable trigger lever allows an
exact dosing of the spray material.
The rotating nozzle (c) allows you to adjust the
ratio of fluid to the volume of air.
Tip: Before starting work, you should conduct a
small test on newspaper to find the ideal settings
for achieving perfect results.
14.10.2009
15:25 Uhr
Seite 7
5. Cleaning and maintenance
5.1 Cleaning
We recommend that you clean the appliance
immediately after you use it.
Clean the accessories after use with a suitable
cleaning agent (observe the instructions on the
working materials).
6. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
7. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
7
Publicité
