Safety Information - SilverCrest SECM 12 B2 Mode D'emploi

Safety information

RISK of ELEcTRIc SHocK
Connect the appliance only to mains power sockets supplying a
►
mains power voltage of 220–240 V ~ , 50 Hz .
Arrange for defective power plugs and/or cables to be replaced as
►
soon as possible by a qualified technician or by our Customer Ser-
vice Department to avoid the risk of injury .
In event of operating malfunctions and before cleaning the appliance,
►
remove the power plug from the mains power socket .
Always remove the power cable from the socket by pulling on the
►
plug, not on the power cable itself .
Do not kink or crush the power cable, and route the cable so that it
►
cannot be stepped on or tripped over .
Do not expose the appliance to humidity and do not use it outdoors .
►
If any liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a qualified
technician .
Never handle the power cable or the power plug with wet hands .
►
Do not open the appliance motor unit . This can lead to risks and also
►
invalidates the warranty .
Disconnect the appliance from the mains power source immediately
►
after use . The appliance is completely free of electrical power only
when unplugged .
The appliance is for indoor use only .
►
Never immerse the appliance motor unit in liquid and do not allow
any liquids to enter the motor unit casing .
SECM 12 B2 GB │ IE │ 13 ■