Roco Z21 Mode D'emploi page 10

Important Information
• In the event of the track voltage failing (e.g. short circuit or emergency stop), the Z21 detector is no longer
supplied so that feedbacks are therefore not possible.
• The Z21 detector is only suitable for use with electric model railway systems. The model railway system should
also never be operated unsupervised.
• Under no circumstances is the Z21 detector to be positioned close to strong sources of heat such as heating
radiators or places where there is direct sunlight.
GB
• As the Z21 detector has exclusively been designed for use in dry interiors, it is not to be operated in environments
that are subjected to great temperature and air humidity fluctuations.
• Prevent the Z21 detector coming into contact with metal objects or live conductors (track voltage) under all
circumstances!
• The supplying booster or the control centre are to provide a maximum of 3A at the track output as each of the
inputs could be overloaded otherwise. The Z21 control centres and Z21 boosters from Roco meet this
requirement.
Technical Data:
Input voltage
Input current
Internal CAN or R-BUS consumption
Internal track input consumption
Output per channel
Digital system
Occupied message
Dimensions L x W x H
Scope of Delivery:
• Z21 detector
• R-BUS cable
• CAN-BUS-Kabel
• 2-pin plug-in terminal for the track connection
• 8-pin plug-in terminal for the occupied detector inputs
10
8010808920.indd 10
12-24V DCC or MM
4,1A max.
0,25W
0,65W
3A
DCC and/or Motorola
8x per current measurement and RailCom
104 mm x 104 mm x 25 mm
®
29.08.2017 11:51:39