Reversing The Door Swing - KitchenAid 2199010 Guide D'utilisation Et D'entretien

Reversing the door swing

TOOLS NEEDED:
5
⁄ -inch hex-head socket wrench, No. 2 Phillips screw-
16
driver, flat-head screwdriver,
SUGGESTION: Reversing the door swing should be
performed by a qualified person.
IMPORTANT INFORMATION:
• Before you begin, turn refrigerator OFF, unplug it, and
remove any food from door shelves.
• Remove base grille.
• When removing hinges, keep doors closed until ready to
lift free from cabinet.
• To remove doors, start at the top hinge and work your
way down.
• To replace doors, start at the bottom hinge and work
your way up.
• Line up doors so they are centered between the sides of
the cabinet and parallel with each other.
• Seal all unused openings with screws or plastic plugs.
Moisture will enter any openings.
NOTE: After the doors are reversed, reinstall the handles.
If the doors are not shutting on their own, see "Leveling"
in the "Installing Your Refrigerator" section.
1 ⁄ -inch open-end wrench.
2
Reversing the hinges
TOP HINGE
Cover
Screws
Top hinge
Shim
Screws
CENTER HINGE
Door stop
Spacer
Shim
Hinge pin
Screws
BOTTOM HINGE
Door stop
Spacer
Hinge
Screws
HANDLE SCREW
5 ⁄ -inch HEX
16
(USE ON TOP AND
HEAD HINGE
BOTTOM OF HANDLES)
SCREW
Shim
OVAL SEALING
SCREW
(USE ON TOP OF
DOORS)
31