Safety-Related Information; Correct Use; Warnings - oventrop Oilstop V Notice D'utilisation

Oilstop V anti-siphon valve

Safety-related information

2. Safety-related information
2.1

Correct use

Operational safety is only guaranteed if the product is used as intended.
The Oventrop Oilstop diaphragm anti-siphon valve is used in the suction pipe of
oil firing systems according to DIN 4755 where the max. level in the tank is
above the lowest point in the suction pipe.
The valve prevents the heating oil from leaking out of the tank in the event of a
leak in the downstream suction pipe.
Installation is possible both in one pipe systems (with and without return flow
feed) and in the suction pipe of two pipe systems.
In two pipe systems, the return pipe must end with a free outlet in the
tank.
Any use beyond and/or different from this is considered improper use.
Claims of any kind against the manufacturer and/or his authorised
representatives for damage resulting from improper use cannot be recognised.
Proper use also includes correct compliance with these instructions.
2.2

Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger!
Possible consequences if the danger occurs or the warning is ignored.
!
Ways to avoid the danger.
Signal words define the severity of the danger posed by a situation.
NOTICE
Indicates a situation that can potentially result in damage to property if not
avoided.
210420384-V02.08.2021
EN
31