General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop Multidis SF Notice D'utilisation

„Multidis SF"
1.

General information

The original operating instructions were drafted
in German.
The operating instructions in other languages
have been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the
stainless steel distributor "Multidis SF" for 2 to
12 heating/cooling circuits.

1.2 Extent of supply

Check your delivery for any damages caused
during transit and for completeness
Items included in the delivery:
• Flow distributor
• Return collector
• 2 brackets
• 4 screws
• 4 dowels
• 2 ring gaskets for the connection between
the stainless steel distributor/collector and
the ball valve
• Printed tags for marking the heating/cool-
ing circuit
• Operating instructions

1.3 Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
Germany
Technical services
Telephone: +49 (0) 29 62 82-234
1.4 Copyright and protective
rights
These operating instructions are copyrighted.
They are exclusively designed for persons
involved with the product.
140655280-V01.02.2020

1.5 Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that
this product complies with the basic require-
ments and other relevant provisions of the EC
Directives concerned.
The declaration of conformity can be obtained
from the manufacturer.
1.6 Information regarding
operating instructions

1.6.1 Used symbols

Highlights important information and
further explanations.
Action required
f
• List
1. Fixed order. Steps 1 to X.
2.
Result of action
Z
2.

Safety-related information

2.1 Normative directives

Observe the constructional and commercial
regulations as well as the regulations relating to
water during installation.
The current standards, regulations and guide-
lines apply.
• DIN EN 1264
• DIN 18380
• VDI 2035
• DIN EN 16313

2.2 Correct use

Operating safety is only guaranteed if the prod-
uct is used correctly.
The stainless steel distributor "Multidis SF" is
used for the central distribution of the heating/
cooling water to the different circuits of a
dwelling unit.
Any other use of the product will be considered
incorrect use.
General information
17