Replace The Clamp Jaws - Wohler Rm 200 Instructions De Service

5.2

Replace the clamp jaws

Fig. 13: Clamp jaws
Fig. 14: Remove the housing cover
Fig. 15: Clamp jaws
The clamp jaws grip the cable when the lever is
pressed down so that the cable rotates. Replace
the clamp jaws if the cable does not rotate during
operation.
NOTE!
It may be sufficient to clean it only. To replace the
clamp jaw, proceed as follows:
Remove the housing cover.
•
To do this, loosen the two screws with a 5 mm
•
Allen key.
Remove the clamp jaws from the housing.
•
Maintenance
EN
35