Drain Cleaning - Wohler Rm 200 Instructions De Service

4.2

Drain cleaning

Fig. 8: Press control handle
Insert the cable into the pipeline as much as
•
possible.
NOTE!
Keep one segment (20 – 30 mm) of the cable be-
tween the machine and the pipeline opening.
Turn the control switch to "For" to let the ma-
•
chine shaft rotate clockwise.
NOTE!
Press the handle to move the machine clutch,
which makes the cables rotate. Releasing the
handle stops the cables rotation immediately.
As long as you press the handle, it is not possible
to move the cable forward or backward.
• To loosen the cable from a blockage, set the
control switch to "Rev".
Operation
EN
31