Prcd-Switch - Wohler RM 200 Instructions De Service

Components
3.2

PRCD-Switch

Fig. 3: PRCD-Switch
28
The Wöhler RM 200 has a PRCD-switch (person-
al safety switch) to protect user and drain cleaner
against dangerous currents due to possibly defec-
tive electrical equipment.
WARNING!
Check the functionality of the switch before each
use of the RM 200 as follows:
Turn on the Wöhler RM 200.
•
Press TEST.
•
If the device switches off automatically, the
PRCD-switch is working and it is safe to work with
the Wöhler RM 200.
If the Wöhler RM 200 is still working after
•
pressing the "TEST-button", disconnect the
power supply immediately.
To start normal working mode after inspection,
•
press RÜCKSETZEN (Reset).