Declaration Of Conformity - asecos APA.145.75 Mode D'emploi

18. Declaration of Conformity

We
have in sole responsibility developed, designed and produced the following products
Description
And declare that this product complies with the following standard(s) or directive(s) in this declaration
2006/42/EC
2006/95/EC
2004/108/EC
94/9/EC
The following European standard(s) was/were applied
BS EN ISO 12100-1
BS EN ISO 12100-2
BS EN 60204-1
BS EN ISO 13857
BS EN 61000-6-2
BS EN 61010-1
BS EN 14175-2
BS EN 14175-3
Page 1 of 2
22
Declaration of Conformity
asecos GmbH
Sicherheit und Umweltschutz
Weiherfeldsiedlung 16-18
D-63584 Gründau
Hazardous material workplaces
APA.145.75 APA.145.90
Directive of the European Parliament and of the Council on the
approximation of the laws, regulations and administrative provisions of
the Member States for machines (Machinery Directive)
Directive of the European Parliament and of the Council on the
approximation of the legal regulations of the Member States relating to
electrical equipment designed for use within certain voltage limits (Low
Voltage Directive)
Directive of the European Parliament and of the Council on the
approximation of the legal regulations of the Member States with
regard to electromagnetic compatibility (EMC Directive)
Directive of the European Parliament and of the Council on the
approximation of the legal regulations of the Member States concerning
equipment and protective systems intended for use in potentially
explosive atmospheres (ATEX)
Safety of machinery –
Basic concepts, general principles for design –
Part 1: Basic terminology, methodology (ISO 12100–1:2003)
Part 2: Technical principles (ISO 12100–2:2003)
Safety of machinery – electrical equipment of machines
Part 1: General requirements (IEC 60204–1:2005, modified)
Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limbs (ISO 13857:2008)
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards
Immunity for industrial environments (IEC 61000-6-2:2005)
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
Fume cupboards - Safety and performance requirements
Fume cupboards - Type test methods
Declaration of conformity für hazardous material workplaces APA