Lock Function/Button Lock; Cooking With Time Control - Unold 58105 Notice D'utilisation

13. The appliance can be switched off at any time during the cooking process
by pressing the EIN/AUS button.
14. The settings made are not saved at the end of the program or if the program
is cancelled.
15. The fan continues to run for approx. 30 seconds after the end of the program.
16. If the program is not controlled via the time selection, the appliance auto-
matically switches off after two hours at the latest.
17. After use, unplug the power plug from the electrical outlet to save energy.
18. Caution: Do not leave the appliance unattended while you are cooking with it.
CAUTION:
The glass cooktop can become hot from the heat radiated from pots or pans.
Therefore, do not touch the surface immediately after cooking.

LOCK FUNCTION/BUTTON LOCK

The appliance can be locked to prevent unintentional operation of the appliance.
Switching on the lock function:
1. Simultaneously tap the "+" and "-" buttons.
2. When "L" is shown in the display, the lock function is active. The display
will then alternately show the selected temperature or power level and "L".
Settings can no longer be made. Only the EIN/AUS button can be activated
to switch off the appliance
Switching off the lock function
3. Simultaneously tap the "+" and "-" buttons again. When only the selected
temperature level or power level is displayed, the lock function is switched
off.
4. Note: As soon as the appliance is disconnected from the mains, the lock
function is no longer switched on; if necessary it must be activated again.

COOKING WITH TIME CONTROL

This function makes it possible to program the appliance so that it automatically
switches off after a specified time.
1. First, select the desired function as described above (heating power or tem-
perature).
28 von 92
Copyright UNOLD AG | www.unold.de
Stand 9.3.2020