PERFECTPRO UBOX 100 Mode D'emploi page 7

Powering the radio
1. Battery operation
1.
Installing the batteries, first turn battery cover fixture
anti-clockwise to loosen and open the battery cover.
2.
Insert 6 X AA size (UM-3) batteries into the
compartment. Ensure the batteries are inserted
in accordance with the diagram shown. Close
the battery cover and fasten the fixture by turning
clockwise. If the radio is not to be used for any
extended period of time, it is recommended
that the batteries are removed from the radio.
Reduced power, distortion, a stuttering sound or
"LOWPOWER"
signs that the batteries need to be replaced.
2. AC operation
Before you plug the AC cord into the AC socket,
make sure the voltage is correct. If you have
batteries in the radio and use the AC power cord,
the batteries will automatically be disconnected.
Power cord storage is designed to store the cord
when the radio is not in use.
IMPORTANT: The mains plug is used as the
means of connecting the radio to the mains supply.
The mains socket used for the radio must remain
accessible during normal use. In order to disconnect
the radio from the mains completely, the mains
plug should be removed from the mains outlet
completely.
flashing on the display are all
GB
6