PERFECTPRO UBOX 100 Mode D'emploi page 12

Setting the clock manually
Clock can be set either the radio is power on or off. The
display will show "--:-- --" when the batteries are installed
or when the radio is connected to the mains supply.
1. Press and hold the Info/Menu button to enter the menu
setting.
2. Rotate the Tuning control knob until "TIME SET" shows
on the display. Press the Tuning control knob to enter
the setting. The hour digit will flash on the display.
3. Rotate the Tuning control knob to set the desired hour.
Then press the Tuning control knob to confirm the
setting. The minute digit will flash on the display.
4. Rotate the Tuning control knob to set the desired
minute. Then press the Tuning control knob to confirm
the setting.
11
Setting the time format
1. Press and hold the Info/Menu button to enter the menu
setting.
2. Rotate the Tuning control knob until "CLOCK 24H (or
12H)" shows on the display. Press the Tuning control
knob to enter the setting.
3. Rotate the Tuning control knob to select 12 or 24 hour
format and press the Tuning control knob to confirm
the setting. If the 12 hour clock format is chosen, the
radio will then use the 12 hour clock with an AM or PM
indicator.