Listening To A Connected Component - Sony MDR-DS6500 Mode D'emploi

 Operation

Listening to a Connected Component

Before starting, be sure to read "Connecting the Headphone System"
(pages 13 to 15) and make the proper connections.
1
Turn on the component connected to the processor.
BD/DVD device, digital satellite/
TV receiver, GAME device, or other
audio or video component
2
Remove the headphones from the processor.
The processor turns on automatically. The processor automatically detects the optimum
frequency for transmission according to your room conditions. Then the Decode Mode
indicator lights up, depending on the audio signal input from the connected audio or video
component.
Signal transmission system
This unit employs a proprietary transmission system using 2.4 GHz frequency. You can
enjoy non-compressed sound with this wireless system.
3
Put on the headphones.
Press the POWER button for 2 seconds to turn on the headphones, the power indicator
lights up in green.
Be sure to match the right and left side of the headphones with your ears. Adjust the
headphones band to fit your ears.
There is a tactile dot on the left housing to distinguish the left side.
Tactile dot
US
16
Operation
POWER
Power
indicator