VESTEL VHK60BX Mode D'emploi page 62

3. Attach the one-way valve to the outlet of the cooker hood with two 4mm x 8mm screws.
4. Determine the position of the two holes on the wall for hanging the cooker hood and for
the plate to attach the chimney. NOTICE! The minimum distance between the supporting
surface of the cooking appliance and the lowest part of the cooker hood must be:
• Gas cookers:
• Electric cookers:
• Coal or oil cookers:
5. Drill the four holes in the wall with the 8mm drill.
6. Insert the four wall plugs.
7. Attach the plate with two 4mm x 40mm screws.
8. Place two 4mm x 30mm screws in the two lowest wall plugs.
9. Put the cooker hood on the screws. Tighten the screws.
62 | VESTEL VHK60BX-VHK90BX-VHT60CX and VHT90CX
70 cm
70 cm
80 cm
inside chimney bracket
4mm x 30mm screws