VESTEL VHK60BX Mode D'emploi page 56

8. Mount the chimney:
• Put the inner chimney on the outer chimney.
• Pull the inner chimney upwards.
• Attach plate I on the outer chimney with two 4mm x 8mm screws.
Inner
chimney
Outer
chimney
9. Put the chimney on the cooker hood.
10. Determine the location of plate I and plate II.
11. Remove the chimney from the cooker hood.
12. Drill the four holes in the wall to attach plate I and plate II with the 8mm drill.
13. Insert the four wall plugs.
14. Do one of the following:
• If you use the cooker hood with the active carbon filter:
i. Attach plate II to the wall with two 4mm x 40mm screws.
ii. Put the chimney on the cooker hood.
iii. Attach plate I to the wall with two 4mm x 40mm screws.
56 | VESTEL VHK60BX-VHK90BX-VHT60CX and VHT90CX
Screw
4mm x 8mm
Plate I