Cleaning Sensors And Wheels; Cleaning Driving Wheels And Center Wheel; Battery Removal - Vileda VR 302 Manuel De L'utilisateur

G

4.4 Cleaning driving wheels and center wheel

In case you want to replace the battery of VR 302, please make sure you use only a battery provided by the
manufacturer.
1. Make sure the device is switched off at the main switch.
2. Remove the screws on battery cover with a screw driver.
3. Remove the battery cover.
4. Lift the battery and remove it from the housing.
5. Unplug the wire connector that links the battery and robot.
16

4.3 Cleaning Sensors and Wheels

4.5 Battery Removal

Once per month slightly wipe all the
sensors as well as the charging
poles from the dockingstation with a
soft cleaning cloth or tool.
NOTE: Keep the robot and sensors
dry and avoid to be affected with
damp.
Monthly remove hair and dust from
the left, right and center wheel with
the maintenance brush or a soft
cleaning tool.