EHEIM skimmarine100 Mode D'emploi page 14

English
4. Commissioning
Installing the magnet holder (⌦A)
Attention! Strong magnets! Danger of crushing!
▶ Separate the magnets by twisting them.
▶ Place the magnets at a distance of 30 cm away from each other.
1. Secure the dampening rubbers b into the pertinent bores a with
gentle twisting motions.
2. At all four corners, press the magnet half without logo c onto the
dampening rubbers.
3. Check the grip by moving the magnet.
Installing the lime wood airstone
1. Pull the box d out of the body e (⌦B).
2. Screw the airstone f onto the thread in the box until it stops
(⌦C).
‧ The hose and pump are not included in the scope of delivery.
‧ For optimal operation, an airflow of 100 l/h must be guaranteed.
We recommend that you use the EHEIM air pump 100 (art.
no. 3701010).
‧ Please note that the actual airflow is reduced when a check valve
is used, and a higher pump performance may be required as a
result.
3. Connect your pump's hose to the connecting pieces of the box
(⌦D).
Hang the box in your aquarium and check the tightness of the
connection. Ensure that no large air bubbles appear!
4. Place the box at the lower edge and fold it into the body.
14