Riester 11321 Mode D'emploi page 17

2.3.7 Lamps
Exchanging the lamp
ri-focus ® ri-focus ® reverse
ri-clar ® 55/100 mm
clar N 55/100 mm
Attention!
2.3.8 Operation of the battery charger
ri-focus ® LED and clar N 55/100 mm
Unscrew the front part of the lamp head and carefully pull the lamp together with the cera-
mic base out of the connecting socket.
Push a new lamp into the ceramic base and then place the complete unit back into the
lamp fixture. Care should be taken not to touch the glass body of the new lamp with the
fingers!
Turn the lamp away from the mirror with the help of the adjustable lamp joint. Unscrew the
protective cover with a slotted screwdriver and remove it. Take the lamp out by turning it
and replace it with a new lamp. Put the protective cover back and screw into place.
Turn the lamp away from the mirror with the help of the adjustable lamp joint (enlarge the
clearance). The lamp can then be unscrewed and a new lamp screwed back into place.
Allow the lamp to cool down first before exchanging the lamp!
Plug the charger into the mains socket and then connect it to the battery compartment. As
soon as a connection to the battery compartment has been made, the charging indicator
of the unit lights up and the rechargeable batteries will be charged up.
Charging time: First charge minimum 24 hours.
Following charges are possible over night or as required.
17