LENCO SCD-70 Mode D'emploi page 7

Getting Started
Never place the player in direct sunlight. For comfortable viewing, we recommend a soft
light. Place it on a sturdy platform of which the surface should be flat and steady, so the
product can't fall or hit by any objects. Make sure the product is placed in such a manner
that nothing can fall on top of it, as pressure will damage or break the product. Prevent
insertion of objects into the ventilation slots, or openings in the cabinet at all time.
Connecting the power cord
Connect the power cord to the player by connecting the small flat end of the cable to the
power connection on the rear of the player. Connect the wide flat end of the cable to the
power outlet.
The power outlet must be easily accessible, so that the power cord can be easily
disconnected from the outlet when there is a problem with the device.
Installing the batteries
1. Open the battery door
2. Follow the polar mark in battery compartment and
insert 6 x C size batteries
3. Close the battery door
Battery maintenance
To maximize the battery and remote control lifetime,
please follow these instructions:

Remove the battery from the player if it is not used
longer than a week.

Always keep the player away from heat sources.

Lenco recommends the use of A-brand batteries. Do not use rechargeable batteries.
Basic operation
Playing a music disc
1. Press "Mode" to choose CD mode
2. Open CD compartment cover, place a disc in and close it.
Once disc is loaded, and play automatically.
Other operation
TO
Pause
Stop
Select previous/next folder(only available
in MP3 CD or USB)
Select a track/file
Repeat play(Repeat mode appear every
10 secs on display when enabled)
Do this
Press once. To return to playback, press
this button again
Press once
Press "Station (-)/(+)" once
Press or
Press "Repeat" button to select between
Normal/Repeat One/Repeat Folder/Repeat
All/Shuffle
7
once