LENCO SCD-70 Mode D'emploi page 10

Using the Menu control
It let you to configure some system option or this product. To change the menu setting,
press and hold "Info/menu" button until entered to menu mode, use "Station(-)/(+)" and
"Enter" to choose and confirm your selection correspondingly.

*Full scan – it will scan available DAB stations.

*Manual tune – manually select a particular channel/frequency for DAB station.

*DRC - This function reduces the difference between the loudest and quietest audio
being broadcast.
DRC options: off(default)/high/low
Note: DRC only works if it is enabled by the broadcaster for a specific station.

*Prune - This removes all invalid stations indicated in the station list with a '?' in front
of the station name.

^Scan setting – select the method of scans and stop at FM mode.
Scan options: Strong stations (default)/All stations

^Audio setting – By default, all stereo stations are reproduced in stereo.
Audio options: Stereo allowed (default)/Forced mono)
Remarks: * DAB mode only, ^ FM mode only
Using the System menu
You could tailor different functions in System menu. Press and hold "Info/menu" and select
"System", then press "Enter" to login to. Use "Station (-)/(+)" and "Enter" to choose and
confirm your selection correspondingly.

Equaliser – There are 7 options in equalizer. You could also create your own EQ, by
select "My EQ" and adjust (Treble/Bass) from -7 to +7 level.
EQ Options:

My
(Treble/Bass)

Classic

Speech

Time – You could tailor your time and date format.

Set Time/Date

Auto update – You could choose the update method of time and date.
Update options:

Update from Any(default)

Update from DAB

Update from FM
 No update

Set 12/24 hour – You could change the time format on the display.
Time format options:

Set 24 hour(default)
 Set 12 hour

EQ Normal

Pop
10

Jazz

Rock