Télécharger Imprimer la page

LENCO SCD-70 Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Set date format - You could change the date format on the display.
Date format options:
DD-MM-YYYY(default)
MM-DD-YYYY
Backlight – You could adjust the level of backlight in different scenarios.
Timeout – LCD backlight will switch off in corresponding duration.
Timeout options: On(default)/10/20/30/45/60/90/120/180 seconds
On level – It represents the LCD backlight level during working.
On Level options: High(default)/Medium/Low
Dim level – It represents the LCD backlight level during standby mode.
Dim Level options: High(default)/Medium/Low
Language – There have 4 languages option.
Language options: English/French/Dutch/Italian
Factory Reset – A factory reset clears all user defined settings, replacing them with
the original default values, so time/date, preferences/settings, DAB station list and
preset stations are all lost.
SW version – It shows the software version of the player.
Trouble Shooting
Problem:
The device does not turn on
The CD player does not play even
when a CD is in place
FM Hiss/DAB Burbling/intermittent
cut-out/DAB No stations available
message
Error messages
Error messages
'Service not available'
'Signal error'
'No DAB Station'
'No stations found'
'No Radio Text'
'No PTY'
'No Name'
Solutions:
Make sure the AC power cord is connected to the
correctly.
Place the CD with label side up.
Clean the CD.
Check/move antenna. Move radio. Rescan local
(high-strength) stations only. (For DAB, check local
coverage at www.ukdigitalradio.com/coverage then
rescan stations).
Meaning
No DAB reception.
The DAB signal has been interrupted.
The listed station cannot be found. (No Name): The current
station does not broadcast an identity name.
No DAB stations are available, check aerial.
No RDS text information is available on this station.
No RDS programme type information is available.
No RDS station name is being broadcast.
11

Publicité

loading