Status Leds; Initial Operation; Remote Control - DURAVIT SensoWash Slim Notice D'utilisation

If the remote control is not available or the batteries are empty,
then basic functions can also be switched on or off from the side
control buttons.
> Press the lock of the "Battery Compartment"
> Insert two lithium batteries (CR2032) with + facing upwards.
> Close the "Battery Compartment"
EN

4.2 Status LEDs

Red illuminated: SensoWash
Green illumina-
ted:
Green flashing:
Red flashing:

5. Initial operation

Remote control

> Press the lock of the "Battery Compartment"
> Remove the foil safety tag in the battery compartment.
> Close the "Battery Compartment"
8
® is in the „Standby mode", all func-
tions cannot be used.
®
SensoWash is in the „On mode", all functions
can be used.
®
SensoWash is in the „Initialization" process,
only „Power"
A
Malfunction. Disconnect main power supply
and proceed with chapter 9.
8
.
8
on the seat unit can work.
8
.
8
to open it.
to open it.