DURAVIT SensoWash Slim Notice D'utilisation page 21

Problem
The water
spray intensity
is too weak.
The water tem-
perature is not
warm enough.
The water
spray from the
spray wand
suddenly stops.
A jet of water is
not emerging
from the spray
wand.
Night light function
The night light
does not come
on.
Potential cause
The water spray
intensity has been
set to Low.
The water supply
hose has buckled.
The water tempera-
ture has been set to
Off or Low.
The function au-
tomatically stops
after 2 minutes.
The spray nozzle is
clogged.
The night light has
been set to Off
mode.
The night light is
in Auto mode and
the ambient light is
bright.
Solution
> Adjust the "Water
spray intensity"
and/or to Medi-
3
um or High.
> Contact your
installer.
> Adjust the "Water
temperature"
Medium or High.
This is normal.
> Clean the spray
nozzle.
This is normal.
> Set the night light
to Auto or On mode.
This is normal.
Ch.
6.2
2
EN
6.2
to
6
7.2
6.3
21