DURAVIT SensoWash Slim Notice D'utilisation page 6

Keep the power cord away from hot surfaces and sharp edges.
Do NOT use the product if it is not working properly.
Disconnect from the power supply immediately. Close the stop
valve to interrupt the water supply. Contact help@duravit.com.
Avoid malfunctions and damage to the product as a result of
improper use.
EN
CAUTION
> Supply the device with cold drinking water from the main water
system.
> Do NOT connect any waste water, grey water, industrial water,
sea water or other untreated or semi-treated water.
If the SensoWash
location, condensation may form. Leave the unit switched off
for a few hours.
Do NOT install the SensoWash
ger of frost. The room temperature must not be less than 4°C.
Do NOT place open fire sources, candles, cigarettes, or similar,
on the SensoWash
Do NOT expose the SensoWash
Do NOT climb on or stand on the product.
Do NOT place any heavy objects on the lid.
Do NOT deliberately soil, spray or block the spray wand.
Repairs must only be carried out by a person with the neces-
sary expertise.
Do NOT carry out modifications, tamper with, install additional
equipment or attempt to repair the SensoWash
Repairs must be carried out by qualified electricians or techni-
cians.
Improperly performed repairs can lead to accidents, damage
and malfunctions.
Do NOT use attachments not recommended by Duravit.
6
Health damage and potential product damage!
® is moved from a cold location to a warm
® .
®
in rooms where there is a dan-
®
directly to water or sunlight.
®
.