Troubleshooting - Leica RANGEMASTER CRF 1600-R Notice D'utilisation

EN

TROUBLESHOOTING

Problem
The image is not circular when
viewing.
Display not focused
When measuring the range, the
display shows "- -
Display flashes or no measurement
is possible
30
Cause
a) The viewer's pupil is not located
in the eyepiece exit pupil.
b) The position of the eyepiece cup
does not match that for correct
use with and without glasses.
Diopter compensation not exact.
a) Above or below measuring
range
-"
b) Object is not sufficiently
reflective
Battery dead
Remedy
a) Correct the eye position.
b) Correct the adjustment: If
wearing glasses, push down the
eyepiece cup; without glasses, it
should remain raised (see p. 22).
Repeat diopter compensation
(see p. 22)
Take account of specifications for
the measuring range (see p. 26)
Replace battery (see p. 20)