Viewing And Checking Settings - Leica RANGEMASTER CRF 1600-R Notice D'utilisation

EN
Settings
When the device is turned on: Wait until the display
disappears. When the device is not turned on:
Start with step 1.
1. Press and hold the secondary button
• The display shows USEU.
2. Press the secondary button briefly (<2s) one
times.
• The display changes.
3. Press the main button (2) several times to select
the required setting
4. Save your setting by briefly pressing the
secondary button.
• The saved setting is lit continuously for 4s as
confirmation and then disappears.
28
1
(≥3s).
(EHr
ON/OFF).

VIEWING AND CHECKING SETTINGS

If you want to check your settings, you can display the
values at any time.
To do this, briefly press the secondary button
• Below the reticle (or instead of the range), the fol-
lowing will appear in turn for around 2s each:
– the set unit system
– (if the function is enabled)
EHr
1
twice.
(EU or US)