Electrical Safety Guidelines; Intended Use - Olympia ECS 408.2 CCD Mode D'emploi

1.2

Electrical safety guidelines

Ensure that the voltage specification of the device coincides with that of
Attention:
your power outlet; refer to Chapter "Technical Data"!
Disconnect the power plug from the power socket:
●
before emptying the waste bin,
●
if it will remain unused for a longer period,
●
before cleaning the device,
●
before moving the device.
●
Do not put the device into operation in the case of damage to the power cable, the
●
power plug or the device itself (risk of injury)!
Do not complete any modifications to the power cable because it is designed for the
●
power supply specified.
Only use an approved extension cable. Do not use any multiple sockets, adapters or
●
unapproved extension cables.
Never exceed the recommended load capacity of the power socket or any connected
●
extension cables!
It is forbidden to open the cutting mechanism attachment for repair pur-
Attention:
poses. Risk of fatal injury! In addition, all claims under the terms of guaran-
tee will be deemed null and void.
2

Intended Use

Only use the ECS 408.2 CCD shredder to shred paper, CDs, DVDs and credit cards
●
by inserting them in the respective slot! The material to be shredded must be dry and
comply with the requirements stipulated in Chapter "Technical Data"! Attempting to
shred other material can lead to personal injury (e.g. through splinters from hard
material, etc.) and damage to the equipment (e.g. damage to the cutting mechanism
etc.).
Remove all paper clips before feeding paper in the device!
●
Do not shred continuous forms, labels or envelopes in this device! Doing so could
●
damage the cutting mechanism and, as a result, all claims under the terms of
guarantee will be deemed null and void.
The unit may only be used in dry, indoor rooms.
●
The device is not intended for commercial use. Observe the operating cycle
●
stipulated in Chapter "Technical Data".
17