Worx Landroid WG793E Mode D'emploi page 7

Trees
If there are roots emerging from the ground, this area should be
avoided in order not to damage the roots.
Depressions and bumps
In the case of large bumps or dips, please consider if the blades
could touch the ground; if this is the case, either make the
inclines smoother or exclude those areas from your Landroid
operation.
35% (20°)
Slopes
Your Landroid L has the ability to safely climb slopes up to 35%
®
(20°), so just avoid anything steeper than this.
Placement of Boundary Wire on slopes
The Upper Boundary Wire should NOT be placed on slopes
steeper than 35% (20°). The Upper Boundary Wire should have
a distance of at least 35cm between any obstacles. The Lower
Boundary Wire should NOT be placed on slopes steeper than
25% (15°). The Lower
Boundary Wire should have a distance of at least 45cm between
any obstacles when it is positioned on a slope that is 25%.
L 's
®
7
EN