Worx Landroid WG793E Mode D'emploi page 15

Programming
Having finished the installation, it is now time to program the Landroid
display shown below. Please refer to the Programming and Troubleshooting Guide included in the packaging.
Ready to go?
The Landroid L is designed for maintaining your grass at a perfect length during the season, but is not designed for deforesting a
®
jungle.
Before starting it for the first time,
1. You should mow your lawn to the desired height.
2. Make sure the operating area is clear from objects such as toys and branches...
3. Adjust the cutting height to its maximum level for the first mow and then adjust to your preferred lawn grass height.
Next Spring, let your Landroid
40
35
45
50
25
55
20
60
L start mowing early, when the grass is still short, so that you can avoid a preliminary grass cut.
®
L when you want it to go to work by using the keypad
®
30
15
EN