Rehau A-LIGHT2 KOMBI Mode D'emploi page 26

1. When changing the compression
jaws, always first push the long
compression jaw and then the short
one onto the tool cylinder.
2. Fix the compression jaws with the
pins.
Attention:
Ensure the identical alignment of the
double jaws (for example, size 25)!
Always push the pins in all the way!
3. The compression jaw sets can be
brought into the correct position by
rotating the tool
26
4. To insert the battery, push it
completely into the holder until it
locks into position on its own.
5. Expanding function
Rotate the expanding unit in the
direction of the operating switch. The
expanding unit will be automatically
activated.
6. Compression function
Rotate the compression unit in the
direction of the operating switch =>
compression function.