Connecting The Cooler - Dometic COOLFREEZE CFX95DZW Notice D'utilisation

CFX95DZW
6.3

Connecting the cooler

Connecting to a battery (vehicle or boat)
The cooler can be operated with DC voltage.
A
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
➤ Plug the DC connection cable (fig. 1 2, page 3) into the device DC voltage
socket and also into a DC socket.
Connecting to AC mains (e.g. in the home or office)
D
DANGER! Danger of electrocution!
• Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
• If you are operating your cooler on board a boat from a mains
connection, you must install a residual current circuit breaker
between the AC mains and the cooler.
Seek advice from a trained technician.
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source. The priority circuit automatically switches the
cooler to mains operation, if the device is connected to an AC mains, even if the
DC connection cable is still attached.
➤ Plug the AC connection cable (fig. 1 3, page 3) into the device AC voltage
socket and connect it to the AC voltage mains.
EN
Operation
15