Enabling Wi-Fi Signal For Optional App - Dometic COOLFREEZE CFX95DZW Notice D'utilisation

CFX95DZW
Switching on compartment
If the display of the compartment shows "OFF", you can switch on the compartment
as follows:
➤ Press the "SET" button (fig. 3 4, page 3):
– once for the large compartment
– twice for the small compartment
✓ The display of the respective compartment blinks.
➤ Press the "ON/OFF" button (fig. 3 1, page 3).
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed.
6.8

Enabling Wi-Fi signal for optional app

The cooler can be controlled via Wi-Fi using an app that you can install on a
compatible device. The app has control, display and alarm functions.
You find further information on the Dometic website for your country (see back
page). Note that the app may not be available in your country.
The Wi-Fi name of the compressor cooler begins with "CFX". The preset password
is "00000000". You can change the Wi-Fi name and password individually.
Switching the Wi-Fi signal on or off
➤ Press the "SET" button (fig. 3 4, page 3) six times.
➤ Use the "UP +" (fig. 3 10, page 3) and "DOWN –" (fig. 3 9, page 3) buttons
to switch the Wi-Fi signal on or off.
✓ The desired setting appears in the display for a few seconds. The display flashes
several times and then the current temperature is displayed again.
I
NOTE
• The default setting for the Wi-Fi transmitter is off. For first time use and
whenever power to the device is interrupted, switch on the Wi-Fi
transmitter to use the app.
• The Wi-Fi transmitter uses a small amount of power. For optimal
energy performance switch the Wi-Fi transmitter off if it is not being
used.
EN
Operation
19