Energy Saving Tips; Connecting The Cooler - Dometic CoolFreeze CFX95DZ2 Notice D'utilisation

Operation
➤ Re-fit centre hinge in new position.
➤ Insert the lids in the hinges on the opposite side (fig. 6 D, page 5).
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit
as follows:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 3) three times.
➤ Use the "UP +" (fig. 3 10, page 3) or "DOWN –" (fig. 3 9, page 3)
buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in both displays for a few
seconds. The displays flash several times before returning to the current
temperature.
7.2

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow warm food to cool down first before placing it in the cooling device
to keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
Defrost the cooler once a layer of ice forms.
Avoid unnecessarily low temperatures.
7.3

Connecting the cooler

Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 V or 24 V
A
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
14
.
g
CFX95DZ2
EN