Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Use only 3/8" [10mm] Hex Head Galvanized Bolts. Lag
Screws should NOT be used. Secure each post
with four bolts.
Fig. 1
Step 5:
Check Mounted Posts
1. Shim post as needed to ensure post is level.
Fig. 1
BRACKET INSTALLATION
Step 1:
Mark Bracket Hole Locations
1. Mark the centerline of each post with a pencil.
2. Take measurements used in Fig. 1 and 2 to mark bottom
and top bracket hole locations onto posts.
Note:
• Installed panel heights include space between the deck
surface and underside of bottom rail. V-Series has a
spacing of 3-3/4" [96mm].
8
Fig. 2
Fig. 2
Wood Block
Joist / Blocking
V-SERIES: VERTICAL CABLE INSTALLATION
Shim post as needed to
ensure post is level
Deck Board
1/2"
[13
]
mm
Publicité
Table des Matières
