Fortress Building Products V Série Instructions D'installation page 29

Fig. 3
Fig. 5
STAIR BRACKET: POST MOUNTING
• Reference Post Mounting instructions on page 6.
STAIR BRACKET: CUTTING DOWN PANELS
Step 1: Measure & Mark Panels Where Cuts Will Be Made
1. Position wood 2" x 4" (actual 1-1/2" [38mm] x 3-1/2"
[89mm]) under bottom brackets.
2. Rake and place panel next to posts on top of wood 2" x 4"
(actual 1-1/2" [38mm] x 3-1/2" [89mm]).
3. Measure spacing from inside edge of post to the
baluster space. Spacing CANNOT exceed 4" [102mm] on
each end. As shown in Fig. 1.
4. Use a level to ensure panel cables and posts are both
straight.
V-SERIES: VERTICAL CABLE INSTALLATION
Fig. 4
29