Fortress Building Products V Série Instructions D'installation page 21

Fig. 3
Step 5: Determine Panel Length
1. Check to ensure that all posts are square and straight.
Shim posts as required.
2. Ensure that the Angle Bracket Cups are approximately
aligned.
3. With another person's help, measure the distance from
the inside back of one cup to the inside back of the other
cup. This will be the panel length. As shown in Fig. 2 below.
Fig. 1
Fig. 2
UB-05 Angle Bracket
DO NOT measure
from post
Measure from
back of bracket
V-SERIES: VERTICAL CABLE INSTALLATION
21