Standby Mode; Navigation Buttons - switel DF 100 Série Mode D'emploi

Preliminary Information
Icons and texts in the handset display
Icon Description
Displays current battery charge capacity
Alarm function is activated
Ringing volume = Off
New calls have been registered in the CID book (calls log); .
Page 73.
The handsfree facility is activated; . Page 66.
The key lock function is activated; . Page 66.
Answering machine provided in the telephone network.
VMWI
providers; . Page 67.
The microphone is deactivated (muted); . Page 66.
Secrecy On
On: The connection to the base station is good.
Flashing: The connection to the base station is interrupted.
Move nearer to the base station.
The answering machine is switched on.
New messages are recorded on the answering machine.
1
VMWI: Visual Message Waiting Indication = Visual indicator that new messages
have been recorded.
64
1
− Supplementary service offered by telephone network
70

Standby mode

All descriptions in this operating manual assume that the handset is in Standby mode.
The system switches to Standby mode by pressing the ‹ button.
Energy−save mode
When the handset has been in Standby mode for some time, it automatically switches to
energy−save mode. The buttons and display no longer light up. Press ‹ to activate
the Standby mode.
71

Navigation buttons

The softkeys (1) and (6) are assigned different functions in the different menus. The
function buttons are always referred to in this manual according to the texts directly
above them in the display.
6
5
4
Button In Standby mode
1 − Open the phone book menu
2 − Open the redialling list
− Switch the handset
3
on / off
4 − Open the phone book
5 − Call button / handsfree
6 − Open the main menu
72
Navigating in the menu
All the functions can be accessed via the various menus.
Refer to the Menu Structure . Page 68 for information on how to access each respec-
tive function.
Menu
æ/ç
Text Messaging
1
2
3
In a menu
− Back
− Up
− Activate the Standby mode /
cancel actions
− Down
− Next
Open the main menu
Select the submenu required