Operating Elements - switel DF 100 Série Mode D'emploi

Operating Elements

Setting the display language
Select the language required (see Menu Structure"on Page 68):
> Mobilteil-Einst. > Sprache >...
Menü
Menu
> Set Handset > Language >...
Setting the date and time on the handset
The time and date are set via the menu. Refer to Page 70 for the sequence of menu op-
tion selections.
Auto answer (Auto-Talk)
If this function is activated, an incoming call is taken when the handset is removed from
the base station. The automatic answering function is activated and deactivated using
the menu. Refer to Page 71 for the sequence of menu option selections.
Private branch exchanges
The information on Page 67 explains how to install your telephone in a private branch ex-
change.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT
cordless telephones when in Standby mode (when the handset is in the
base station).
In talk mode, radiation is reduced (depending on the distance between the handset and
base station).
Default setting = Settings→ Set Base → ECO Mode → Off
The telephone can be set up so that the radiation frequency is reduced; . Page 71.
If necessary, you can increase the range of the telephone system by swit-
ching ECO mode off .
62
3 Operating Elements
The buttons in this operating manual are subsequently depicted with a uniform contour.
Therefore, slight deviations in the appearance of the symbols on the telephone buttons
compared to those depicted here are possible.
Handset
1 Receiver
2 Display
3 Softkey, right
æ Scroll upwards /
4
Redialling
‹ On−hook button
5
# button /
6
Key lock
I Internal calls
7
8 Microphone
R button
9
* button /
10
Temporary tone dialling
ƒ Call button /
11
Handsfree
ç Scroll downwards /
12
Phone book
13 Softkey, left
14 Loudspeaker
(on rear side)
1
2
14
13
3
12
4
11
5
10
9
6
7
8