Explanation Of Warning Symbols And Notes - Hama 00118604 06 Série Mode D'emploi

g Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instruc-
tions and information completely. Please keep
these instructions in a safe place for future re-
ference. If you sell the device, please pass these
operating instructions on to the new owner.
1. Explanation of warning symbols and
notes
Warning
► This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
Note
► This symbol is used to indicate additio-
nal information or important notes.
2. Package contents:
- TV wall bracket
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note
► Please check that the installation kit is
complete before installing the bracket
and ensure that none of the parts are
faulty or damaged.
118604_06man_cs_de_el_en_es_fi_fr_hu_it_nl_pl_pt_ro_ru_sk_sv_tr.indd 7
3. Safety instructions
• For proper installation, please have this bra-
cket fitted by a qualified specialist.
• If the wall on which the television is to be
mounted is made of other types of material
than those specified, you should buy appro-
priate installation material from a specialised
dealer.
• Also observe the safety clearance around the
TV unit (depends on the model).
• The bracket may not be mounted above loca-
tions where persons might linger.
• Once you have mounted the bracket and the
flat panel display, check that they are suffici-
ently secure and safe to use.
• You should repeat this check at regular inter-
vals (at least every three months).
• In case of damage, remove the TV and do not
continue to use the holder.
• Ensure that no electrical cables and connec-
tions are crushed or damaged during instal-
lation or adjusting.
• Do not place loads on the bracket that are
heavier than the load-bearing capacity spe-
cified and do not exceed the specified maxi-
mum screen size.
• Ensure that the bracket is loaded symme-
trically. During adjustment, ensure that the
bracket is loaded symmetrically and that the
maximum weight is not exceeded.
4. Intended use and specifications
• The bracket is used for wall mounting flat
panel displays for non-commercial, private
household use.
• The bracket is only intended for use within
buildings.
• Use the bracket only for the intended pur-
pose.
7
05.07.12 10:4