Heat-Up; Cleaning And Care; Cleaning The Blender Jug - SilverCrest SSK 300 A1 Mode D'emploi

9) To interrupt the cooking process, press the BOIL/
GB
STEAM button q or the ON/OFF button e.
IE
10) Remove the lid 2 carefully.
11) Remove the egg insert 7 from the blender
jug 3.

Heat-up

You can also reheat soups that you have made
earlier with the appliance.
NOTE
► Before using the HEAT-UP function, the blender
jug 3 must be cleaned thoroughly. Ensure
that no food residue remains at the bottom
of the appliance.
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Pour in the soup to be heated up.
3) Press the ON/OFF button e. The appliance
emits an acoustic signal. All control lamps
fl ash.
4) Press the HEAT-UP button r. Two signal tones
will confi rm your selection and the corresponding
signal lamp will fl ash.
The heating of the soup now takes place automatic-
ally: The appliance heats and mixes alternately.
As soon as the heating process is complete, the
appliance will stop automatically.
NOTE
► You can stop the heating process at any time
by pressing the ON/OFF button e or the
HEAT-UP button r. The control lamp then
goes off and the appliance switches itself off .
8

Cleaning and care

It is best to clean the appliance as soon as it has
cooled down after each use. Dried-on food residue
is more diffi cult to remove.

Cleaning the blender jug

DANGER – ELECTRIC SHOCK!
► Ensure that no liquids come into contact with
the electrical connector on the blender jug 3!
NEVER immerse the blender jug 3 in
water or other liquids! Otherwise there
is a risk of an electric shock.
WARNING! RISK OF INJURY!
Take care when cleaning the blender jug 3.
►
The blade 4 is very sharp!
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Add a little warm water and a drop of
washing up liquid to the blender jug 3.
3) Close the lid 2.
4) Press the ON/OFF button e.
5) Press the PULSE button t and allow the
appliance to run for about 1 minute.
6) Remove the plug from the mains power socket.
7) Remove stubborn remains using the cleaning
brush 8 or the cleaning sponge 0. The narrow
side of the cleaning brush 8 is particularly
well-suited to removing food residue from the
bottom of the appliance.
8) Afterwards, empty the container and rinse it
out thoroughly with clear water.
SSK 300 A1