HellermannTyton Relifix Série Notice De Montage page 9

8 Secure the shell with cable ties against accidental
opening.
Securing the shell with cable ties.
; The product has been successfully installed.
5 .3 Installing the Relifix V 410
Proceed as follows:
1 Strip the cables as shown in the figure and align the
cores.
f A: Straight through connection
f B: Branch connection
10 mm 25 mm
30 mm 10 mm
Stripping the cables.
2 Align the cores before connecting.
Aligning the cores.
3 Connect the cores with the matching press connectors
and right tool.
Connecting the cores.
Installation Instructions • Relifix • 11-2016
Installation
30 mm 15 mm
9