User Information; Field Of Application; Used Labels And Symbols; Safekeeping Of Documents And - HellermannTyton Relifix Série Notice De Montage

User information

1 User information
Before the product is used for the first time, all persons
who will be using the product must have carefully read
and understood the installation instructions.
This documentation as well as translations hereof are the
property of the HellermannTyton Group. Replication,
editing, reproducing or distribution in whole or in parts
for purposes other than following the original intended
use requires the prior written consent from the
HellermannTyton Group.

1 .1 Field of application

The installation instructions are directed towards
technicians and the user. The installation instructions
only apply for the products in the Relifix series, called
"product" in the following:
TYPE
Relifix V 31 .5
Relifix V 516
Relifix V 410
Relifix V 416
Relifix V 135Y
Relifix V 56
Relifix V 150
Relifix V 506Y
Relifix V 525
Relifix V 525Y

1 .2 Used labels and symbols

In these instructions, different labels and symbols are
used in the text. These are explained in the following:
• Symbol for an enumeration
f Symbol for an instruction
1 First step
2 Following steps
; Outcome
Display text/screen text
Æ Cross reference
Texts with this symbol contain information on environmental
protection.
Texts with this symbol contain additional information.
4
Article-No .
435-00650
435-00655
435-00652
435-00653
435-00657
435-00654
435-00651
435-00658
435-00656
435-00659
Installation Instructions • Relifix • 11-2016
1 .3 Safekeeping of documents and actuality
f Keep these instructions as well as all other supplied
documents in a safe place, so that they are available at
any time.
f Please note:
Due to the continuous development of the products,
there may be deviations between the documentation
and the product. The current edition can be found at
www.HellermannTyton.com/site/downloads.

1 .4 Intended use

The product is only intended to establish underground
and above-ground cable connections.
The product may only be installed by trained specialised
personnel according to the installation instructions. The
specifications contained in these installation instructions
are based on our current state of research and
development.
Due to the diversity of workmanship and use
possibilities, the user must check the suitability of the
product for the intended purpose.
The product may only be used for the purposes
described in these installation instructions. The product
may only be used in technically perfect condition in
accordance with its intended use and the installation
instructions, and only by competent persons who are
fully aware of the risks involved.

1 .5 EC conformity

The product fulfills the requirements in accordance with:
• Test methods and requirements for cable-accessories
DIN EN 50393
• Glow-wire flammability test method for end-products
DIN EN 60695-2-11

1 .6 Applicable documents

The nonverbal installation instructions must be observed
for every product.

1 .7 Customer service and spare parts

If you have any questions or suggestions, please contact
HellermannTyton. The contact data is listed at the end of
this documentation.