Initial Operation; Unpacking; Connecting The Devices; Avs 470Connecting Cables - Schott Instruments Avs 470 Mode D'emploi

41

2 Initial operation

2.1

Unpacking

Please observer the operating voltage (90 to 240 V, 50...60Hz), it is indicated on the type plate. The device
may be placed and operated on any plane surface. Placing it on the VZ 8571 panel. Up to two device may
be stacked.
2.2

Connecting the devices

2.2.1

AVS 470connecting cables:

Description Length
Data cable Appr. 1.5m
2.2.2

Suitable viscometer types, racks, and measurement stands

Viscometer
Type
Ubbelohde (DIN)
Ubbelohde (ASTM)
Micro-Ubbelohde
Cannon-Fenske-Routine
Mikro-Ostwald
The hose combinations are to be selected on the basis of the required application, e.g. VZ 8521,
VZ 8522, VZ 8523, and VZ 8524.
When using Ubbelohde viscometers with TC sensors, the ignition temperature of the media to be
measured has to be taken into account.
It has to be higher than 250°C.
Chapter 2 initial operation
Connects:
AVS470
Rack
Type no.
532... 053 92
530...
526... 053 92
537... 053 92
520... –
517... 053 97
through: to:
9-channel Serial printer
adapter
Measurement stand
Type no.
AVS/S
AVS/S
AVS/S
AVS/SK-CF
AVS/S
AVS/SK
AVS/SK
AVS/SK
AVS/SK