SCHOTT Instruments AVS 470 Mode D'emploi page 45

Translation of the legally binding German version
Technical Data AVS 470
Viscosity Measuring Unit
Connections:
Back panel of the device:
Data in- and output:
Mains connector:
To be connected to the front panel of ViscoPump II modules:
Pneumatic connectors: Pressure/suction venting, to be connected to viscometer.
Overflow guard for VZ 8552 suction line:
Capacitive sensor:
Viscometer:
TC viscometer:
Power supply:
Materials:
Casing:
Front panel :
Ambient
conditions:
th
28.April, April 28 , 28 Avril 2003
AGQSF 0000-A081-00/040128
Schott Instruments
1 serial RS-232-C interface: 9-channel sub-miniature D sockets
for use with a serial data printer
Device plug with safety interrupter according to VDE 0625, IEC 320/C14,
EN 60320/C14, DIN 49 457 B
DIN round-plug connector, 4-channel (ViscoPump II module)
Screwed cap according to DIN 45321
Round-plug connector with bayonet catch, DIN 5 channels.
for AVS/S (measurement stand), 5-channel socket
4-channel DIN socket
Corresponds to Protection Class 1 according to DIN 57 411, Part 1 / VDE 0411, Part 1
Mains connection: 90 - 240 V, 50...60 Hz
Mains fuse: Fine-wire fuse 5 x 20 mm, 250 V~, 4 A, time-lag design
Power consumption: 100 VA (without connection of a 115V/230V vacuum pump)
Steel/aluminium casing with chemically resistant two-component coating, stackable
Dimensions: approx. 255 x 204 x 320 mm (WxHxD)
Weight: Approx. 5.34 kg with 1 ViscoPump II module
Polyethyleneterephtalate (PET)
Ambient temperature: +10 ... +40°C for operation and storage
Air humidity according to EN 61 010, Part 1:
max. rel. hum. 80% for temperatures up to 31°C, linearly decreasing down to 50%
rel. hum at a temperature of 40°C
SCHOTT Instruments GmbH
Hattenbergstraße 10
55122 Mainz
Deutschland, Germany, Allemagne
(Release 05 Mai 2003)
Page 2 of 2