Pelgrim MAG 689RVS Mode D'emploi page 108

If you have a query concerning the operation of your appliance, this does not necessarily mean that
there is a breakdown. In all events, check the following points:
You notice that
The time is counting down but the appliance
is not functioning (the food is not heated)
demo
and " " flashes in the display.
The appliance does not switch on.
The appliance continues to make a noise
after the programme has finished.
The appliance is noisy.
The turntable does not revolve properly.
You notice steam on the glass.
The food is not heated in the microwave
programme.
Smoke comes off the grill at the start
of the programme.
The appliance produces sparks.
Solution
Demonstration mode has been set. To switch
back into operating mode,
three keys all at the same time:
Check that the appliance is properly connected.
Check that the oven door is properly closed.
Check that the child lock feature
is not programmed.
In order to evacuate residual steam, your
appliance is equipped with a delayed ventila-
tion feature. According to the cooking mode
chosen (solo/grill/combined), the ventilation
may continue to function after the end of the
programme.
Clean the rollers and the roller area under the
turntable.
Check that the rollers are correctly positioned.
Wipe off the condensation with a cloth.
Check that the utensils are suitable for fuse
with microwave ovens and that the power
level is appropriate.
Remove all cooking residues from the heat-
ing element before each use.
Clean the appliance thoroughly: remove
grease, cooking particles, etc.
Make sure no metal objects are close to the
oven walls.
Never use metal objects with the grill.
Never operate your oven when it is empty.
press the following