Sanitas SBM 37 Mode D'emploi page 29

• To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button M1 or M2 for 5 se-
conds (depending on the user memory you are in).
• The selected value is deleted. The device briefly dis-
plays CL 00.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP button.
Transfer via Bluetooth
®
It is also possible to transfer the measured values saved on the
device to your smartphone using Bluetooth
nology.
You will need the "HealthCoach" app for this. This is available in
the Apple App Store and from Google Play.
Proceed as follows to transfer values:
If Bluetooth is activated in the settings menu, the data is trans-
®
ferred automatically after the measurement. The
pears in the top left of the display (see chapter 4 „Preparing the
measurement").
low energy technology
low energy tech-
®
Step 4: SBM 37
data transfer immediately fol-
lowing measurements.
• If Bluetooth
fer has been activated,
data is by transferred after
having confirmed the user
symbol ap-
memory by pressing the
pressing the START/STOP
button
29
Step 1: SBM 37
Activate Bluetooth on your device (see chapter 4
®
"Preparing the measurement", Bluetooth
Step 2: "HealthCoach" app
In the "HealthCoach" app, add the SBM 37 under
"Settings/My devices".
Step 3: SBM 37
take a measurement.
Step 4: SBM 37
Data transfer at a later point:
• Go to memory mode (chap-
data trans- ter 7). Select the desired
®
user memory. The Blue-
tooth
matically.
.
).
®
transfer starts auto-
®