Sanitas SBM 37 Mode D'emploi page 23

Set the hour format, date, time and Bluetooth
The following section describes the functions and settings avail-
able on the blood pressure monitor.
Hour format Date
➔
It is essential to set the correct date and time. Otherwise, you will
not be able to save your measured values correctly with a date
and time and access them again later.
If you press and hold the M1 or M2 memory button, you can
set the values more quickly.
Press and hold the START/STOP button
The hour format now flashes on the display.
• Select the desired hour format using the M1/
M2 memory buttons and confirm with the
START/STOP button
settings
®
Time ➔ Bluetooth
➔
for 5 seconds.
.
The year flashes on the display.
• Select the year using the M1/M2 memory
buttons and confirm with the START/STOP
button .
®
The month flashes on the display.
• Select the month using the M1/M2 memory
buttons and confirm with the START/STOP
button .
The day flashes on the display.
• Select the current day using the M1/M2 me-
mory buttons and confirm with the START/
STOP button
• If you have set the 12h hour format, the month is
displayed before the day.
The hours flash on the display.
• Select the current hours using the M1/
M2 memory buttons and confirm with the
START/STOP button
The minutes flash on the display.
• Select the current minutes using the M1/
M2 memory buttons and confirm with the
START/STOP button
23
.
.
.